High Temperature Laboratory Muffle Furnace

Product Name

1700C Laboratory Muffle Furnace

Model No.

ACEY-MF36-17

Type

Box-type; Front-loading

Furnace Structure

1. The furnace chamber is constructed from powder-coated carbon steel and incorporates integrated insulation materials, heating elements, a temperature control system, electrical components, and a thermocouple.

2. The furnace body and temperature controller are designed as separate units for enhanced operational flexibility and ease of maintenance.

Inner Chamber Size

W300xD400xH300 mm

Chamber Capacity: 36 liters

Designed max. Temp.

1700°C

Constant Working Temp.

1600°C

Min. Working Temp.

Ambient

Heating Rate

Fast heat-up time due to the low thermal mass construction

Suggest 5~10℃/min for longer life using of furnace

Temp. Homogeneity

Adopt the way of measuring temperature at 9-point;

Temperature homogeneity is +/-5 degree

Power Supply

AC380V/13KW/50Hz, three phases

Chamber Material

1. The furnace utilizes high-grade 1800-series alumina polycrystalline fiber, manufactured with Japanese vacuum-adsorption forming technology. This advanced material offers excellent thermal insulation, durability, and high tensile strength without extraneous particles, delivering significantly higher energy efficiency compared to conventional fiber insulation.

2. Featuring a one-piece chamber design and eco-friendly insulation materials, the system ensures superior thermal efficiency and uniform heat distribution.

Heating Element

High quality U shape 1800# MoSi2 rods

Vertical layout, distributes in two sides evenly, give an improved temperature gradient

Resistance of a MoSi2 heating element does not change under normal use, and you can mix new and old elements together.

Thermocouple

Type B

Installation location: back wall center

Temperature Controller

Top brand Yudian PID with 30 programmable segments

Simultaneous LED display of actual temperature VS set point

PID automatic control and auto-tune function

temperature accuracy +/- 1 ºC

Electronic Component

SCHNEIDER maker air switch, solid-state relay, A.C contactor etc.

Furnace Shell

1. High quality cold-rolled steel sheets CNC processing, dual wall housing

2. Environmental electrostatic plastic powder coating on surface after deoiling, derusting, phosphating etc.

3. Energy efficient insulation keeps exterior safe to touch

Furnace Door

Manual type, Door opens sideways

Safety Precautions

1. Overheating & Broken thermocouple protection

2. Leakage circuit breaker

3. Automatic power off when furnace door opens

4. Over-temperature protection and alarm allow for operation without attendant(s)

5. Microprocessor-based PID control with self-tuning capability to prevent overshooting of set temperature

Certification

CE

Warranty

One year limited manufacturer's warranty (Consumable parts such as thermocouple heating elements are not covered by the warranty, please order replacements at related products respectively

Warnings

1. For safety reasons, the processing of toxic or explosive substances should only be conducted with appropriate safety controls and supervision in place. It is strongly recommended to operate the furnace within a fume hood for enhanced protection.

2. Minor surface cracks may develop in the refractory ceramic lining over time as a result of repeated thermal cycling. This is considered normal and does not affect performance; such cracks can be effectively repaired using high-temperature alumina coating.

3. Samples must always be placed in a suitable crucible during heating. Direct contact between samples and the furnace chamber floor is strictly prohibited to prevent contamination and damage.