Spot Welding Machine For Lithium Battery
video

Spot Welding Machine For Lithium Battery

Item: Single Sided Spot Welding Machine For Lithium Battery
Model No.: ACEY--D200R
Battery Types: Cylindrical Cell 14500/18650/21700/26650/32650/32700/32140/33140
Warranty: 1 year
MOQ: 1 set
Package: Plywood Case
Send Inquiry
Product Introduction

Automatic Transistor Welding Power Supply Single Sided Spot Welding Machine For Lithium Battery With PC

 

Products Description

 

Single sided spot welding machine is used to weld nickel sheets with many lithium batteries into a group pack, which is suitable for lithium battery pack assembly in the factory for 14500 18650 21700 26650 32700 etc multi-parallel multi-series combination.

 

Features

 

The spot welding machine adopts a precision transistor type welding power supply, which can achieve small, efficient, and high output precision welding.

 

This machine adopts three welding methods:

Fixed voltage welding:  Control the voltage between electrodes, reduce the amount of current, and reduce the generation of sparks during welding.

Fixed current welding:  passing a certain amount of current, independent of the workpiece resistance, can stabilize welding.

Fixed voltage-Fixed current welding:  Welding is controlled by setting both current and voltage simultaneously.

 

Output current direction:

MDA-10000B current flows from the positive electrode to the negative electrode (unipolar welding), mainly suitable for power batteries.

MDB-4000B (polarity conversion welding), mainly suitable for digital batteries.

 

Completion signal: 0-99MS can be set;

Suitable welding range: power batteries/digital batteries/nickel hydrogen nickel chromium batteries/motor rotors/electronic and electrical accessories, etc.

Welding thickness: 0.08-0.2MM nickel plating or pure nickel (it is recommended to open a flow guide groove for 0.15-0.2MM nickel plates, while nickel plates above 0.2MM need to be welded with protruding points).

 

  • Can set preheating current, welding current, and cooling
  • With slow current rise/fall function
  • Easy to install and use
  • Fault diagnosis and automatic protection function
  • Communication interface: RS485
  • Independent external touch screen interface
  • Can be controlled by an external industrial computer/PLC, and cooperate with machine automation production

 

Specification

 

1.Stroke:500*400mm;

2. Welder: electric transistor 10000A;

3. With water cooling system;

4. Welding head rotation function: support 180 degrees rotation;

5. Operating system: embedded system human-machine interface;

6. Support data storage function;

7. Drive mode: step servo motor;

8. Configuration of three sets of fixtures: 18650 with battery holder set, 18650 without holder set, 21700 fixture set, fixture range: within 500mm;

9. Joystick:Joystick for single-sided spot welder, equipped on single-sided welder;

10. With PC.

 

Products Details

 

Single sided spot welder with pc

automatic battery spot welding machine

 

Safety instructions during use:

  • Please do not place it down during transportation or handling to prevent it from falling, colliding, or squeezing
  • Please place the machine horizontally on a stable surface for use, as tilting can easily cause malfunctions
  • Please avoid using the machine in the following places
  • Places with a humidity greater than 90%, places with a temperature higher than 40 ℃, and places with a bottom temperature of 5 ℃
  • Near high-frequency sources

       *Places near flammable and explosive materials
      * Places prone to condensation and dusty areas

  • External cleaning of equipment: Please use a dry cloth or a damp cloth with a small amount of water to wipe. Do not use diluents, acetone, etc. as it may cause discoloration or deformation
  • Do not allow foreign objects such as fine metal, small screwdrivers, coins, etc. to enter the interior of the machine, as it may cause damage and fire
  • This product is not equipped with a welding head tracking mechanism. Welding cables must be purchased separately
  • This product uses a single-phase voltage of 220V, a frequency of 50/60Hz, and a power of 600W!!
  • Using mismatched power supplies can cause damage to this device!

Hot Tags: spot welding machine for lithium battery, China spot welding machine for lithium battery manufacturers, suppliers, Lithium Spot Welding Machine, Battery Pack Spot Welder, Battery Pack Welding Machine, Spot Welder for Lithium Batteries, Automatic Battery Spot Welding Machine, Spot Welding Machine for 18650 Battery

Send Inquiry

whatsapp

Phone

E-mail

Inquiry