Battery Aging Machine
Battery Charging And Discharging Cycle Testing Machine
Battery pack tester

Battery Aging Machine

Name: China Battery Aging Machine - Customized Battery Aging Machine Suppliers Manufacturers - Acey New Energy
Brand: Acey
SKU: 196438846

Item: High Voltage Battery Aging Machine
Model No.: ACEY-CE-6008n
Battery type: Lithium battery pack
Warranty: 1 year
MOQ: 1 set
Package: Plywood Case

Send Inquiry

Product Introduction

Xiamen Acey New Energy Technology Co., Ltd. is a manufacturer and supplier of battery aging machine in China, offering factory-direct supply to customers worldwide. We also provide battery pack assembly equipment and turnkey production lines that comply with applicable CE requirements, along with OEM/ODM services and 24/7 after-sales support. Contact ACEY for product specifications, model selection advice, and a detailed quotation for battery aging machine.

8 Channels 100V 60A High Voltage Battery Aging Machine Regenerative Battery Pack Tester System

Products Description

* Power battery simulation, C-rate test.
* Life cycle test.
* Power test, capacity test, energy density test.
* Power battery virtual distribution: charge/discharge curve fitting, battery consistency test and evaluation.
* High rate charge/discharge test.
* Power battery, serial energy-storage battery module test: single cell voltage, Single cell temperature monitoring(high-voltage equipment).

Specification

1、Model
1. Material code	ACEY-CE-6008n(100V60A-H)
2、Channels information
1. Channels quantity	Channels quantity in one unit	8
2. Main channel	Channel feature	Constant current source and constant voltage source dual closed loop control
	Channel control mode	Independent control
	Channel parallel connection	Support max 4 channels parallel mode. Pulse and SIM tests will be disabled in channels parallel mode.
3、Power grid side parameters
1.Input power	AC380V±15% 50/60±5Hz
2.Power factor	≥99%(Full load)
3.THDi	≤5%(Full load)
4.Input resistance	≥1MΩ
5.Input power	56.5KW
6.Input current	85.8A/single
7.Overall system efficiency(Max)	90%
8.Noise	≤65dB
9.Voltage and current sampling	Four-wire connection(same port for charging and discharging)
10.Power control module type	MOSFET
11.Input power wiring method	Three-phase-five wire system
12.Power input protection	Anti-surge, anti-silos, anti over or under frequency, anti over or under voltage, anti phase absence, etc.
4、Functions and performances
1. Voltage	Output range	Charge:0V～100V
	Output range	Discharge:3V～100V
	Min discharge voltage	3V
	Accuracy	±0.02% of FS
	Resolution	24bit
2. Current	Output range	0.3A～60A
	Accuracy(independent range)	±0.05% of FS
	CV cut-off current	60mA
	Resolution	24bit
3. Power	Single channel output power	6KW
3. Power	Whole machine output power	48KW
4. Time	Current response time	≤3ms
	Current conversion time	≤6ms
	Min. step time	0.1s
5. Charge/Discharge modes	Charge/Discharge modes	CCC, CVC, CC-CVC, CPC
	Charge/Discharge modes	CCD, CVD, CPD, CRD
	Cut-off condition	Voltage, Current, ΔTime, Capacity, -ΔV
6. Simulation	Charge	Current, Power
	Discharge	Current, Power
	Switch	Support continuous switching between charge and discharge
	Cut-off condition	Time, step line
	Steps file lines	1,000,000
7. Pulse Mode	Charge	Current, power
	Discharge	Current, Power
	Min pulse	100ms
	Pulse counts	Up to 32
	Charge and discharge switch	supported
	Cut-off condition	Voltage, ΔTime
8. DCIR		DCIR by calculation
9. Safely protection	Software protection	Power off data protection
		Offline mode function
		Safety protection conditions can be set, including: voltage lower limit, voltage upper limit, current lower limit, current upper limit, delay time, etc.
	Hardware protection	Anti-reverse connection, over-voltage, over-current, over-temperature, etc.