Battery Pack Charge Discharge Tester
Item No.: ACEY-BT10040-4
Order(Moq): 1 set
Compliance: CE Certified
Package: Plywood Case
Product Origin: China
Warranty: One-year warranty with lifetime support
Payment: T/T, Western Union, PayPal, Ali Trade Assurance
Xiamen Acey New Energy Technology Co.,Ltd is one of the most reliable manufacturers and suppliers of battery pack charge discharge tester in China. Please rest assured to buy high quality products made in China here from our factory. Contact us for customized service.
100V 20A Charge 40A Discharge 4 Channels Battery Pack Charge Discharge Tester
Environmental requirements and technical parameters
Power supply of single channel：AC220V ±10% ,50Hz±10%;
Power supply of hole cabinet：AC380V ±10% , 50Hz±10%;
Ambient temperature: - 10~45℃.
No strong vibration in the environment, no corrosive gases and flammable and explosive gases exist.
Introduction
- Charging and discharging function: with constant current and voltage charging function, constant current discharging function, charging and discharging of the battery, recording the battery capacity.
- Charging and discharging interface: fully meet the requirements of battery pack charging and discharging with the same port and charging and discharging sub-port, i.e. 2 wires (P+ P-), 3 wires (P+ P- C-) and positive plate charging protection, negative pole charging protection. 3 wires (P+ P- C-) and positive plate charge protection, negative plate discharge protection of power tool batteries (CH+ P+ P-).
- Checking voltage protection:detecting whether the battery charge protection and discharge protection are working by charging and discharging the battery.
- Safety protection:anti-reverse connection protection function, power-down data protection, support continuous measurement, voltage upper and lower limit setting protection, and safe discharge current protection.
- Online mode: the instrument can be connected to PC through serial port for single unit or less than 5 units; for more than 5 units, a network connection mode is adopted and a network port is provided at the PC side to control up to 30 units.
- Control system: The software system adopts the classical and mature C/S mode, with two modes of communication: serial port can achieve accurate communication of several instruments in short distance, and network can achieve accurate communication of multiple instruments in long distance.
Technology Parameters
|
Model No. |
ACEY-10040-4 |
|
|
Voltage |
Test range |
10~ 100V |
|
Accuracy |
± (0.2% of reading + 0.2% of range) |
|
|
Current |
Charge |
200~20000mA |
|
Discharge |
200~40000mA |
|
|
Accuracy |
± (0.2% of reading + 0.2% of range) |
|
|
Charge |
CV cut-off current |
Min 50mA |
|
Capacity |
Accuracy |
±1‰ |
|
Power |
Discharge power |
≤4000W |
|
Time |
Patrol time |
actual time<2S |
|
Timing range |
0~999 h/work step |
|
|
Data logging interval |
≥5S |
|
|
Communication box version |
1. 1 series |
|
|
Charge |
Charge mode |
CCCV charge |
|
Cut-off condition |
Voltage,current,relative time,overcharge protection |
|
|
Discharge |
Disharge mode |
CC discharge |
|
Cut-off condition |
Voltage, relative time,overdischarge protection |
|
|
cycler |
Cycle measurement range |
1~999 times |
|
Number of work steps in a single cycle |
100 |
|
Dimension
|
Whole cabinet |
900*600*1600mm (W*D*H ) |
|
Single channel |
800*460*230mm (W*D*H ) |
|
battery storage space |
None (can be equipped with its own battery holder) |
|
number of channels |
4 channels |
|
Equipment Accessories |
Test meter pencil cable, online tool, user's manual, host computer software |
Product Display
Hot Tags: battery pack charge discharge tester, China battery pack charge discharge tester manufacturers, suppliers, 60V 100A Battery Pack Testing Equipment, Battery Pack Testing Machine, Battery Charge Discharge Aging Machine, Battery Pack Test System, 30V 20A Battery Pack Charge Discharge Test Equipment, Regenerative Battery Pack Test System
You Might Also Like
Send Inquiry