Battery Life Cycle Tester
Item Name: 100V 30A Battery Life Cycle Tester
Item No.: ACEY-HRCDS-100V30A
Order(Moq): 1 set
Compliance: CE Certified
Package: Plywood Case
Product Origin: China
Warranty: One-year warranty with lifetime support
Payment: T/T, Western Union, PayPal, Ali Trade Assurance
Item No.: ACEY-HRCDS-100V30A
Order(Moq): 1 set
Compliance: CE Certified
Package: Plywood Case
Product Origin: China
Warranty: One-year warranty with lifetime support
Payment: T/T, Western Union, PayPal, Ali Trade Assurance
Send Inquiry
Product Introduction
Xiamen Acey New Energy Technology Co.,Ltd is one of the most reliable manufacturers and suppliers of battery life cycle tester in China. Please rest assured to buy high quality products made in China here from our factory. Contact us for customized service.
100V 30A Energy-feedback Battery Pack Life Cycle Tester
Product Description
100V 30A battery life cycle tester with energy feedback function is designed for evaluating the performance of li-ion battery, lead-acid battery, Ni-Cd battery, NiMH battery, etc under various charging and discharging conditions in research, development, and quality control.
Support battery circle life testing, capacity testing, charging characteristic testing, discharging characteristic testing, charge retention capability testing, charge and discharge efficiency testing, over charge or over discharge rate affordability testing.
Working Environment and Technical Parameters
Power supply of the whole cabinet: AC 380V±10%, frequency: 50HZ±5%.
Maximum input power of the whole cabinet: 60.0 kW (18CH)
Working temperature: 0℃~ 45℃.
Humidity: less than ≤ 85%R.H (non-condensing).
No severe shake, no corrosive gases, no flammable or explosive gases around.
Resolution: AD 16 bit.
Equipment configuration list
| No. | Category | Product name | Product model | Quantity | Remarks |
| 1 | Test equipment | Charge and discharge test equipment | ACEY-HRCDS-100V30A | 18CH | |
| 2 | Cabinet | Charging and discharging equipment cabinet | / | 1PCS | Default without power input line |
| 3 | Computer | Computer | Dell computer I5-10500 processor / 16G memory /256G solid state + 1T hard disk /3 network port | 1PCS | Optional, including mouse, keyboard and 19 inch AOC displayer |
| 4 | Accessories | Charge discharge test line | / | 18PCS | Each channel has a set of test lines with a length of 3.5meters.(including fixture) |
| 5 | Accessories | Switch | TP-LINK TL-SF1008VE | 1PCS | Single cabinet without switch |
| 6 | Accessories | Communication accessories | Communication line / Crystal head, etc. | Several | For communication |
| 7 | Accessories | USB Flash Drive | 16G | 1PCS | Contains Test software etc. |
| 8 | Accessories | File | / | 1PCS | Test report, packing list, etc. |
Advantages
- Power feedback to grid with direct current bus efficiency ≥90%: Both charging and discharging is energy-saving which saves a lot of electric power expenses and air-conditioner fees.
- CCCV charge: CC charge transfer to CV charge smoothly, without any impact, which can avoid the micro-shot circuit due to high temperature of peak current impact or to avoid PCB protection or second protection action caused by over-charging.
- Current and voltage sampling is of high stability and accuracy: this equipment applied 16bit bipolar ADC unit, to ensure voltage sampling high accuracy and long-term stability.
- User management includes authority management, role management and user management. Managers can set management permissions for each function module of the software, and set multiple user IDs according to the operator's permission requirements.
- Voltage clamp function: when battery does protect action through charging process, voltage clamp to pre-set voltage can protect battery or PCB from damage.
- Testing steps can set record conditions by section to achieve intelligent data management.
- Each channel has a built-in CAN and RS485 communication module to support BMS CAN communication function: collect the total voltage, total current, single cell voltage, temperature and other data of BMS system in real time, and make synchronous comparison with HRCDS voltage and current data. When setting BMS voltage, current and temperature and other data to meet certain conditions, the steps of the main channel will stop or convert, and the specific reading information will be provided by the customer.
- It supports user-defined signal sets. Users can customize the setting name according to their own needs and data recording requirements. By adding "sub semaphore" as protection parameters, multiple protection parameters can be set through the operators "maximum value, minimum value, difference value, mean value, +, -,×,÷, and, or, exponential variance, sine and cosine "function and other numerical relations are calculated, and the obtained results can generate new judgment conditions.
Parameters
| No. | Item | ACEY-HRCDS-100V30A | ||
| 1 | Main channels | 1CH/ module | ||
| 2 | Channel working mode | Completely independent | ||
| 3 | Main channel working mode | Charge: CC, CV, CCCV, no voltage or current impact when CC transfer to CV | ||
| Discharge: CD, CP, CR | ||||
| Still | ||||
| Main channel test cutoff condition | Time, total voltage, total current, capacity, -ΔV, Vcell, RSOC, etc. | |||
| 4 | Main channel Voltage | Single channel test range | 0V-100V | |
| Min. discharge voltage | 6V | |||
| Accuracy | ±0.05%FS+0.05%RD | |||
| Resolution | 1mV | |||
| Main channel Current | Single channel test range | ±30A | ||
| Min. output current | 60mA | |||
| Accuracy | ±0.05%FS+0.05%RD | |||
| Resolution | 1mA | |||
| Current start response time | ＜10ms(10%FS~90%FS) | |||
| Time | Resolution | 1s | ||
| Auxiliary voltage (Optional) | Range | DC：0-5V | ||
| Accuracy | ±0.05%FS | |||
| Resolution | 1mV | |||
| Auxiliary temperature (Optional) | Range | ﹣20℃～100℃ | ||
| Accuracy | ±1℃（0℃～80℃） | |||
| Resolution | 0.1℃ | |||
| Power | Output power | Single channel continuous working power 3000W. | ||
| Stability | ±0.1%FS+0.1%RD | |||
| 5 | Communication | LAN | ||
| Battery BMS communication | Support CAN 2.0A, CAN 2.0B; RS485 communication; | |||
| Support DBC import, realize data reading with BMS CAN, and participate in process control | ||||
| 6 | Control program | Support data protection when power off, continue testing caused of power cutoff or manually stop and revise step parameter online. | ||
| Users can set protection condition, include minimum voltage, maximum voltage, minimum current, maximum current, etc. | ||||
| Users can set auxiliary channel protection condition, including minimum voltage, maximum voltage, maximum temperature, minimum temperature. | ||||
| Cycle time | Max. 9999 | |||
| Programmable step | Max. 9999 | |||
| Nested loop | Max. 10 layers | |||
| Step time range | No limit, support h, min, s | |||
| Data record | Time≥1s, Voltage≥0.1%FS, Current ≥0.1%FS | |||
| Program feature | Each step has one or multiple exit. | |||
| 7 | Data display | Cycle list | Circulation number. Charge/discharge capacity, efficiency, power and average voltage, etc. | |
| Process list | Process number, working mode, process time, capacity, power, medium voltage, cut-off voltage, cut-off current, etc. | |||
| Detail list | Record number, system time, cumulative time, voltage, current, energy, power, cell temperature, etc. | |||
| 8 | Data export | Data can be exported as EXCEL, TXT or diagram. Provide charge discharge efficiency, charge discharge curve, voltage, capacity, current-time characteristic curves, etc. | ||
| 9 | Data saving | Save as files | ||
| 10 | Curves type | X-coordinate: total time, charge discharge capacity, cycle time, voltage, current, capacity | ||
| Y-coordinate: total voltage, current, capacity, power, cell temperature(Optional), end of charge and discharge capacity, etc. | ||||
| 11 | Software protection | Power off data protection, power resume continue testing, OVP, ODP, OCP, UCP, OTP, capacity protection, abnormal voltage trend protection, abnormal current trend protection, abnormal current fluctuation protection, abnormal voltage fluctuation protection, abnormal charging voltage increase rate protection, abnormal discharge current decrease rate protection | ||
| Hardware protection | Power off, open circuit and short circuit protection. Reverse or wrong connection protection, OCP, OVP, OTP, fixture contact abnormal protection | |||
| Warning function | Switch off automatically under emergency, shutdown when power off, load connect and disconnect automatically. | |||
| 12 | Barcode scan | Support barcode start and binding test data, classify batteries rapidly and accurately. Support detailed battery database management functions, connect battery information with testing data base, which is easy for management of data base system. | ||
| 13 | Sampling terminals | Four-polar sampling. Copper nose or other fixture. | ||
| 14 | Energy consumption | Discharge power feedback to grid | ||
| 15 | Cooling method | Forced Fan-cooled | ||
| 16 | Noise | Less than 70dB | ||
| IP grade | IP20 | |||
| 17 | Repair | Modularized structure. Can be replaced or repair with spare parts. | ||
| 18 | Software update | Provide regular software upgrade services until the hardware is incompatible. | ||
Products Details
Hot Tags: battery life cycle tester, China battery life cycle tester manufacturers, suppliers, Battery Charge Discharge Aging Machine, Battery Pack Tester, Battery Pack Testing Machine, Battery Aging Machine, Regenerative Battery Pack Test System, Battery Pack Test System
You Might Also Like
Send Inquiry