Should lithium batteries be pasted with highland barley paper or sorted first?
To assemble a finished power lithium battery pack, should the barley paper or sorting be done first? A: There is no rule which one must be in front and which one in the back, but it is more labor-saving to stick barley paper first and then sorting than sorting first and then stick barley paper.
ACEY's 18650 lithium battery automatic barley paper sorting and sticking machine is a barley paper machine and 11-step sorting machine into one, to achieve fully automatic production, improve efficiency and save labor. The process is as follows.
1、When loading the barley paper sorting battery into the loading box, make sure that the positive and negative poles of all the batteries are in the same direction, with the positive pole facing out and the negative pole facing in.
2, press the start button to turn on the machine, first check whether the barley paper sorting machine equipment of each action actuator in the initial position, to confirm that there is no other debris on the equipment, and then turn on the air source, to confirm the pressure of the air source in 0.5 ~ 0.6Mpa, and then turn on the power to run the control program.
3, when the machine is running, do not put your hand into the battery track, so as not to pinch your fingers; when the sticker barley paper sorting machine equipment running abnormal or stop for no reason, you should first press the emergency stop button, and then check the equipment abnormalities, troubleshooting, to release the emergency stop button, so that the robot back to the origin, the system is in a suspended state, and then press the start green button, so that the system to resume automatic operation, if system can not run can press the system reset button to restore the normal working state.
4、After pasting barley paper, the battery automatically slides into the sorting track to start testing directly, here you can save 1 manual.
5, pay attention to ensure that the positive and negative poles of the battery to be sorted clean, to avoid dust and other debris pollution detection probe, to ensure the accuracy of the measurement data, in order to ensure the accuracy of measurement, it is recommended that the normal production situation every 4 hours with alcohol to clean the probe, every month to replace the probe.
6, set the internal resistance voltage value on the LCD screen of the sorting machine, the detection cylinder will be the same range of parameters of the battery into the same slot. When a type of battery sorting is completed to no material alarm, you can long press the green start for 3 seconds to empty the material, or wait 30 seconds after the system will automatically enter the closing mode to automatically sort the remaining material into the slot, after the sorting is complete, the equipment will prompt no material please load.
ACEY focus on lithium battery PACK assembly production equipment and provide one-stop solutions for lithium battery pack assembly line, main products: lithium battery barley paper sticking machine, battery sorting machine, battery spot welding machine, battery charging and discharging aging cabinet and other battery PACK production line equipments.If you want to learn more details, please feel free to contact us.
