Thermostatic Prismatic Battery Charge Discharge Tester

Thermostatic Prismatic Battery Charge Discharge Tester
Prismatic Battery Cell Tester
Thermostatic Battery Cell Testing Machine
Thermostatic Prismatic Battery Charge Discharge Tester

Thermostatic Prismatic Battery Charge Discharge Tester

Name: China Thermostatic Prismatic Battery Charge Discharge Tester Manufacturers Suppliers - Acey New Energy
Brand: Acey
SKU: 232632628

Item: 5V 30A 128 Channels Thermostatic Prismatic Battery Charge Discharge Tester
Model No.: ACEY-BCT530-128P-25C
Battery Type:Prismatic battery
Warranty: 1 year
MOQ: 1 set
Package: Plywood Case

Send Inquiry

Product Introduction

Xiamen Acey New Energy Technology Co.,Ltd is one of the most reliable manufacturers and suppliers of thermostatic prismatic battery charge discharge tester in China. Please rest assured to buy high quality products made in China here from our factory. Contact us for customized service.

5V 30A 128 Channels Thermostatic Prismatic Battery Charge Discharge Tester

Product Description

ACEY-BCT530-128P-25C Thermostatic prismatic battery charge discharge test system is used to test the capacity, cycle life, internal resistance, energy density, temperature characteristics and other parameters of the battery, so as to evaluate the performance and reliability of the battery. This test cabinet adopts the energy-saving technology to feed the energy released by the battery back to the power grid, so as to realize the energy-saving, efficient and reliable test process.

System Characteristics

Box type thermostatic structure, temperature uniformity inside the box 25±2℃.
Front and rear box integrated design, before and after the box for the fixture and thermostat part, the side box for the power supply part, easy maintenance.
Box independent, each box 64 channels, divided into 4 layers, each layer 16 cells, the whole machine 128 channels.
Single point independent, independent constant current and constant voltage source, stable and shockless. Start, stop, pause, continue and protection functions can be realized.
Device precision 0.05%, data recording time 1 second/time, high stability.
Four-wire test interface ensures high measurement accuracy.
Modularized design concept, easy to maintain.

(* The size is subject to the actual model)

Equipment Structure

Independent CPU board, keyboard board, the whole cabinet unified sending control, while supporting single-point start.
Ccurrent and constant voltage control module.
Bidirectional AC/DC inverter module.
Motorized automatic opening clamp.

Main Technical Parameter

Number of equipment channels	The whole machine has 128chs
External dimension	L2054mm*W940mmH2298mm(subject to actual)
Case color	Standard (customizable)
Clamp type	Flat head clamp (optional with crocodile clamp)
Clamp spring	81mm
Support battery specifications	Length70mm-210mm;Width15-70mm;Height 80mm-230mm
Support battery specifications	Lug center distance 40-150mm.
Channel control mode	Each channel can be started, stopped, suspended, continued and protected independently.
	Each channel has independent constant voltage and current. Hardware control circuit
	The accuracy of charging current and discharging current of each channel can be calibrated automatically by software
Working power supply	Three phase five wire AC380V土10%, 50Hz
Power factor	≥0.99,THDu ≤2%
AC current distortion rate	≤2%
efficiency of the whole machine	Charge≥80%, discharge≥70%
Power consumption work	≤23KW
Equipment failure rate	<1%
Work environment	Temperature -10~40°C. Relative humidity 80%
Constant temperature function	Inside the box 25±2℃
Temperature control function	The temperature reaches the preset value before running the work step process.
Power component protection function	1. Grid voltage overrun protection
Power component protection function	2. Grid frequency overrun protection
Heat dissipation mode	Natural wind in, upward exhaust
Voltage measurement range	DC 0~5V
Battery voltage range	Charge DC 0~4.5V; discharge DC 4.5~2V
Constant voltage range	DC 2~4.5V
Voltage accuracy	±(0.05% reading + 0.05% full), resolution ratio 1mV
Voltage Control Resolution	0.1mV
Voltage Sampling Resolution	0.1mV
Voltage stability	≤(±1mA)
Current range	Charge DC300mA～30A; Discharge DC 300mA～50A
Current accuracy	±(0.05% reading + 0.05% full), resolution ratio 1mV
Current Control Resolution	0.1mA
Current Sampling Resolution	0.1mA
Current rise time (90% load)	≤50MS
Channel start-up time (90% load)	≤50MS
Current stability	≤(±1mA)
Control mode	Computer control, can control the whole cabinet with scanning function
Communication mode	485s port communication (port rate 57600)/ TCP
Process settings	Up to 32 steps and 256 cycles can be set
Charging mode	Constant current; constant pressure; constant current & pressure
Charging cut-off conditions	Voltage, current, time, capacity
Discharge mode	Permanent flow, constant power, constant resistance
Discharging cut-off conditions	Voltage, time, and capacity
Protection function	Overvoltage, undervoltage, overcurrent, undercurrent, overcapacity protection, power off protection, data breakpoint recovery
Time frame	0~3000 min / step in min
Time accuracy	≤±0.1%
Sampling inspection cycle	1s-60s optional
Battery sorting	Divide according to capacity, time, open-circuit voltage, discharge platform, etc.
Data processing	Can record voltage, current, time, capacity etc, automatically calculate constant current charging ratio, capacity loss, discharge efficiency, average voltage, median voltage, provide data curve and cycle diagram; can output text, excel, word or mdb format data file
Basic function of software	1. The software supports various connections, such as manual pause continuation, software shutdown continuation, power outage, disconnection in equipment communication, abnormal stop continuation;
	2. Support bar code scanning, scanning one-dimensional code, QR code, channel jump scanning, loading scanning and other scanning methods;
	3. Local test detailed data storage, can view the current test data and historical data of each channel at any time, have data and curve corresponding two ways, and support excel report in single or batch form, and can set the test end automatic data export according to the need.
	4. Support capacity sorting, and grade the battery sorting;
	5. Support the qualified judgment after the test, and judge the pass / ng results according to the specified cycle capacity, voltage, time and other information;
	6. Support various step protection and global voltage, current, temperature abnormal protection, and abnormal alarm, support battery pack overcharge, overdischarge protection test;
	7. Support channel parallel (according to equipment);
	8. Support unit conversion;
	9. Support database server background storage or MES docking;
	10. Software offline protection;