Battery Charge Discharge Tester
Model No.: ACEY-BCT510-256R
Battery Types:Cylinder Battery 32140/33140/34189(Customized)/Etc
Warranty:1 year
MOQ:1 set
Package:Plywood Case
Xiamen Acey New Energy Technology Co.,Ltd is one of the most reliable manufacturers and suppliers of battery charge discharge tester in China. Please rest assured to buy high quality products made in China here from our factory. Contact us for customized service.
Battery Charge Discharge Tester
Products Description
The charge and discharge tester is the most commonly used test equipment for power lithium batteries. New batteries need to be assembled and screened for consistency; in the process of battery pack design and finalization, multiple tests need to be charged and discharged; the performance of the battery pack is inspected, and the working condition test requires the assistance of a charge and discharge tester; old batteries, charge and discharge test health status; some certifications, spot checks and tests at the request of buyers require charge and discharge.
The Battery Charge Discharge Tester is its ability to accurately measure the capacity of a battery. This measurement is critical for users who rely on their batteries to power important devices or equipment. The tester can accurately measure the amount of energy stored in the battery, as well as its ability to hold a charge over time. It is designed to provide accurate readings, and to ensure that the battery is functioning as intended. This makes it an ideal tool for users who need to be confident that their batteries are performing well, especially in critical applications.
Specification
|
Structure of equipment |
|
|
Number Of Device Channels |
The whole machine has a total of 256 channels |
|
Dimensions |
L1684*W1091*H1640 |
|
Chassis Color |
Standard gray black (can be customized) |
|
Fixture Form |
Customized fixture, using pallet structure, cylinder open clamp. |
|
Fixture Spacing |
37mm |
|
Support Battery Specifications |
Length: 120-185mm; Diameter: 34/35mm |
|
Channel Control Mode |
Each battery has an independent constant current and constant voltage source, which is stable and without impact. can be realized |
|
start, stop, pause, resume and protect |
|
|
Each channel has independent constant voltage and constant current hardware control circuit |
|
|
Working Power |
The charging current and discharging current accuracy of each channel can be automatically calibrated by software |
|
Power Factor |
Three-phase five-wire system AC380V±10%, 50HZ |
|
Ac Current Distortion Rate |
≥0.99 |
|
Power Department Efficiency Index |
≤2% |
|
Working Power Consumption |
Charge ≥80%, discharge ≥70% |
|
Equipment Failure Rate |
<1% |
|
Working Environment |
Temperature -10~40, relative humidity 80% |
|
Cooling Method |
TNatural air intake, upward exhaust |
|
Power Section Protection Function |
Grid voltage over-limit protection Power grid frequency over-limit protection |
|
Channel parameters |
|
|
Voltage measurement range |
DC 0~5V |
|
battery voltage range |
Charging DC 0~4.5V; Discharging DC 4.5~2V |
|
Constant voltage range |
DC 2~4.5V |
|
Voltage accuracy |
±(0.5‰ reading+0.5‰ full scale), |
|
Voltage control resolution |
0.1mV |
|
Voltage sampling resolution |
0.1mV |
|
Voltage stability |
≤(±1mV) |
|
Current range |
Charging DC 50mA～20A; Discharging DC 50mA～20A |
|
Current accuracy |
±(0.5‰reading+0.5‰full scale) |
|
Current control resolution |
1mA |
|
Current sampling resolution |
0.1mA |
|
Current stability |
≤(±1mA) |
|
Current Rise Time (90% Load) |
≤50MS |
|
Channel startup time (90% load) |
≤50MS |
|
Software function |
|
|
way to control |
Computer control equipment work, whole cabinet control, with scanning system |
|
communication method |
485 serial communication (baud rate 57600) / TCP communication |
|
Process settings |
Up to 32 steps and 256 cycles can be set |
|
charging mode |
Constant current, constant voltage |
|
Charging cut-off condition |
Voltage, current, time, capacity |
|
discharge mode |
Constant current, constant power, constant resistance |
|
Discharge cut-off condition |
voltage, time, capacity |
|
Protective function |
Charging overvoltage protection, charging undervoltage protection Discharge overvoltage protection, discharge undervoltage protection Charge and discharge voltage trend protection Voltage fluctuation protection Current fluctuation protection Battery reverse connection protection, hardware protection method Power tube short circuit protection Channel capacity alarm protection (timeout protection) Voltage sampling drop protection Voltage outlier protection Capacity outlier protection Open the voltage detection before the process starts, and stop the channel whose open voltage exceeds the limit Power-off protection, data breakpoint recovery |
|
Time Range Time Precision |
0 to 3000 minutes/step, time unit: min ≤±1‰ |
|
Sampling And Inspection Cycle Battery Sorting |
1S-60S |
Products Details
Hot Tags: battery charge discharge tester, China battery charge discharge tester manufacturers, suppliers, Battery Pack Production Line, Lithium Ion Battery Pack Assembly Line, Battery Pack Assembly Line, Lithium Ion Battery Manufacturing Machines, Lithium Ion Battery Manufacturing Equipment, Battery Pack Fabrication Line
You Might Also Like
Send Inquiry