5V50MA 80Chs All-in-One Battery Test System For Coin Cell

5V50MA 80Chs All-in-One Battery Test System For Coin Cell
battery testing system
high voltage battery tester
lithium battery test machine

5V50MA 80Chs All-in-One Battery Test System For Coin Cell

Name: China 5V50MA 80Chs All-in-One Battery Test System For Coin Cell Manufacturers Suppliers - Acey New Energy
Brand: Acey
SKU: 296812564

Item: Battery Cell Testing Equipment
Model No.: ACEY-WGDW-100L-70C-380V-5U
Battery Type: Lithium Battery
Warranty: 1 year
MOQ: 1 set
Warranty: One-year warranty with lifetime support
Package: Plywood Case

Send Inquiry

Product Introduction

Xiamen Acey New Energy Technology Co.,Ltd is one of the most reliable manufacturers and suppliers of 5V50MA 80Chs All-in-One Battery Test System For Coin Cell in China. Please rest assured to buy high quality products made in China here from our factory. Contact us for customized service.

80 Channel Coin Cell Battery Test System for Laboratory R&D

Product Description

The coin cell battery test system is designed for high-precision testing of small lithium batteries, such as coin cells and button cells. It provides accurate measurement of capacity, charge-discharge performance, and cycle life, making it ideal for laboratory research, material development, and small battery analysis. With its multi-channel architecture, the system can test up to 80 cells simultaneously, significantly improving testing efficiency while maintaining high accuracy and stability.

Product Performance

Testing Environment	Operating Room Temperature: above 25℃ Relative humidity: ≤85%(No load)
Testing Method	GB/T 5170.2-2017 temperature test equipment
Temperature Range	-70℃～150℃
Fluctuation	≤±0.5℃ (No load, or during stable temperature)
Deviation	±2.0℃ (No load, or during stable temperature)
Heating Time	+20℃→+150℃ ≤60 min (no load, average non-linearity)
Cooling Time	+20℃→-70℃ ≤75 min (no load, average non-linearity)

Specification

5V50mA Battery Testing System
Items		Values
Resolution		AD:24bit; DA:16bit
Input impedance		≥1G Ω
Voltage	CV output range	10mV~5V
	Min discharge voltage	-5V
	Accuracy	± 0.02% FS
	Stability	0. 04% of FS
Current	Output range/channel	Range1: 0.1mA; Range2: 1mA; Range3: 10mA; Range4: 50mA
	Minimum output current	0.2μA
	Accuracy	± 0.02% FS
	CV cut-off current	Range1: 0.1μA; Range2: 1μA; Range3: 10μA;Range4: 50μA
	Stability	0.04% FS
Power	Output power/channel	0.25	W
	Stability	0. 08% of FS
Time	Current response time	<1ms ( 10%FS~90%FS)
	Working step time	≤ (365*24)h/step Time format-00:00:00.000(h, m, s, ms)
Data record	Data record conditions	Min data record interval :100ms
		Min voltage change: 10mV
	Frequency	10Hz
Charge	Charge modes	CC, CV, CCCV, CP
	Cut-off condition	Voltage, Current, Time, Capacity, Energy, - ΔV
Discharge	Discharge modes	CC, CV, CCCV, CP, CR
	Cut-off condition	Voltage, Current, Time, Capacity, Energy
Pulse	Charge	CC, CP
	Discharge	CC, CP
	Min pulse width	500ms
	Pulse counts	Up to 32
	Chg and Dschg switch	Supported
	Cut-off condition	Voltage, Time
DCIR	Calculated DCIR values available in BTSDA
Cycle	Max cycles	65535
	Max steps	254
	Cycle nest	3
Protection	Safety protection	● Power-failure data protection
		● Offline operation mode
		● User-defined protection conditions, such as upper and lower limited current/voltage, delay time, temperature, etc.

Dimensions
Nominal Volume	100L
Inner Dimensions	W500 mm×D500 mm×H500 mm
Outer Dimensions	W750 mm×D1220 mm×H1800 mm (Without bumps)
Net weight	About 280 kg